Further information on the data projectors available to borrow from Information Services

Data projector

For projecting presentations, images or videos from a laptop onto a screen or wall

Supplied with:

• Power cable
• HDMI cable (High Definition Multimedia Interface)
• VGA cable (Video Graphics Array))
• User manual

Power cable	HDMI cable	VGA cable

To set up the projector:

• Place the projector and laptop on a secure horizontal surface
• Connect the projector to the laptop with the VGA cable or HDMI cable (if supported) from the projector input port to the laptop external video port
• Plug in both mains cables
• Turn on the projector, then the laptop
• To change the screen output from the laptop, hold down the Fn key (function key), and press the key that has a picture of a monitor on it (this is usually the F5 key) at the same time. The method for changing differs depending on the computer being used
• Adjust the height of the projector
• Adjust focus with the rotating lens on the front of the projector
• When finished, turn the laptop off first
• Press the power button twice to turn off the projector
• Wait for the fan to stop cooling the bulb before packing the projector away