Further information on the infra red personal hearing loop receiver available to borrow from Information Services

Infra Red Personal Hearing Loop and Neckloop Telecoil Coupler

Personal Hearing Loop

  • A 4-channel selectable, infrared receiver, compatible with transmitters operating on the 2.3/2.8/3.3/3.8 MHz frequency bands
  • Supplied with a 3 ft (.91 m) lanyard, allowing the receiver to be worn around the neck
  • Size - 4.1” L x 2.85” W x 1.2” H (104.1 mm x 72.4 mm x 30.4 mm)
  • It features dual infrared detectors for maximising sensitivity as well as operating range
  • A comfortable body-pack design includes a convenient channel selector along with an easy-to-use on/off volume control
  • Can be used with mono or stereo headphones, earphones or a neckloop
  • Uses AA alkaline or rechargeable batteries

N.B. Battery chargers are available to borrow separately

Neckloop Telecoil Coupler

  • Designed to magnetically couple the audio output from the Infra Red Personal Hearing Loop unit into a hearing aid equipped with a T-Coil.
  • It will work with any audio device which has a 8-16 Ohm audio output through a 3.5mm jack.
  • The neckloop works only with hearing aids equipped with a T-Coil and is designed to work with products that have stereo jacks.


Infra Red Personal Hearing Loop with lanyard Neckloop Telecoil Coupler
Infra Red Personal Hearing Loop with lanyard Neckloop Telecoil Coupler

Suitable for:

  • Conferences
  • Small conference rooms
  • Universities
  • Multi-Media Rooms
  • Classrooms
  • Boardrooms
  • Small cinema/theaters
  • Deliberation rooms

User Manuals:



Contact for this page:
Information Services, Aberystwyth University, Hugh Owen Library, Penglais, Aberystwyth, SY23 3DZ
Tel: 01970 62 2400 Email: is@aber.ac.uk